NORTECK Hydraulic Auger for Mini Excavator 200mm

Auger drilling on an 800 kg to 1.5 t mini excavator demands precise selection of diameter and mounting. This NORTECK hydraulic kit pairs a 200 mm diameter bit with a 1 m working depth and a 25 mm mounting pin. Two hydraulic hoses and seals are included, so you can mount it without sourcing extra parts.

Drilling at Ø200 mm: What This Auger Covers

The 200 mm diameter suits tree planting in root balls, post setting, or light probing. On an 800 kg to 1.5 t machine, the hydraulic motor converts the excavator's flow into bit rotation. The 25 mm pin determines compatibility with your mini excavator's mounting plate: the KUBOTA KX36-3, KX41-2, and JCB 801 models are common on this segment.

Check Before You Mount

• Drilling diameter: 200 mm
• Depth: 1 m
• Pin diameter: 25 mm
• Includes: 2 hydraulic hoses, seals, Ø200 mm bit
• Machine range: 800 kg to 1.5 t

There is also a Ø150 mm hydraulic auger for mini excavators, useful when the soil is denser or a smaller bore is required.

Machine Compatibility and Mounting

The 25 mm pin mounting suits small compact excavators whose arm geometry allows direct drive. Before ordering, verify the mounting plate spacing and hydraulic flow of your machine—these determine rotation speed and drilling consistency. The KUBOTA KX36-3, KX41-2, and JCB 801 are typical fits for this tool.

For handling tasks on the same class of machine, the NORTECK mini excavator thumb complements the setup without changing machines. And if you need wider holes, a 30 cm diameter mini excavator auger bit fits the same pin if the hydraulic motor is retained.