Mini Excavator Auger Bit Diameter 20 cm

Drilling at Ø 200 mm on Mini Excavators

The 200 mm auger bit is intended for operators preparing precise holes for planting, posts, piles, or drainage. The drilling diameter is the key spec: 200 mm nominal opening, a dimension that directly determines the volume of spoil removed per pass.

Mounting is done on the machine's hydraulic circuit or via an adapter depending on the carrier's interface. Before ordering, the operator must verify that the attachment type on their machine matches that of the bit. Compact excavator quick couplers are not standardized, and this check avoids a wasted return or an on-site incompatibility.

Checkpoints Before Use

• Drilling diameter: 200 mm
• Applications: planting, light foundations, fencing, piles, posts, drainage
• Compatibility: Mini excavators, subject to mounting type and auxiliary hydraulic flow
• Wear part: Replaceable tip

This bit is part of a mini excavator auger range that also includes the 30 cm diameter and the 15 cm diameter, giving the operator the choice of size based on soil conditions and the section of the post or pile to be installed.

For jobs that combine drilling and earthmoving, a hydraulic thumb for material handling can complete the machine setup when loads need to be gripped and moved near the anchor points.