- New
Hydraulic Hedge Trimmer for Mini Excavator
Référence : TH-15
TH-15 hydraulic cutter bar for mini excavators with motor and hoses. Requires 20 l/min flow. Trims hedges and mows grass.
1 041,67 € Tax Excluded
€1,450.00
€1,250.00 Tax Included-€200.00
Home delivery: €92.00 incl. VAT
Dispatch between Tue 22 and Thu 24
Warehouse in France - Champagne-Ardenne
Hydraulic Hedge Trimmer for Mini Excavator
The Norteck TH-15 hydraulic cutter bar turns a mini excavator into a front-end trimming tool. Supplied with its hydraulic motor, hoses, and mounting pin, it mounts directly onto the machine's boom. The carrier's hydraulic circuit powers the bar; a minimum flow rate of 20 l/min is required to drive the blade.
Mounting and Hydraulic Requirements
The attachment connects via a supplied pin. Operation is controlled from the mini excavator's auxiliary hydraulic circuit. An oil flow below 20 l/min will not achieve the rated cutting speed. Check your pump's specifications before commissioning.
Technical Specifications
- Max branch diameter: 10 mm
- Minimum flow rate: 20 l/min
- Supplied with: hydraulic motor, hoses, mounting pin
The bar is suitable for trimming small hedges and mowing grass. The mounting pins are included. For heavier pruning tasks, check the 64 cm hydraulic mulcher for mini excavators, which handles larger sections.
On machines from 800 kg to 1.8 tonnes, the hydraulic thumb complements the work station for grabbing cut branches. For splitting operations, the hydraulic log splitter uses the same auxiliary circuit.
FAQ
What hydraulic flow rate is required for this mini excavator hedge trimmer?
The carrier's circuit must provide at least 20 liters per minute to properly drive the cutter bar.
Is the hydraulic motor supplied with the cutter bar?
Yes, the hydraulic motor is included, along with the hydraulic hoses and the mounting pin for the mini excavator.
What branch diameter can this hedge trimmer cut?
The cutter bar handles branches up to 10 mm in diameter. It is designed for trimming small hedges and mowing grass.
How is this hedge trimmer mounted on the mini excavator?
It attaches to the machine's boom via a supplied pin. Operation is via the carrier vehicle's hydraulic system.
25 other products in the same category:
0 Reviews (0/5)
Write a review and get voucher for discount 1 € (Tax Included) , valid for 365 days 
Share your review on Facebook and get voucher for discount 1 € (Tax Included) , valid for 365 days 
Reward points apply only to purchased products.
TH-15 hydraulic cutter bar for mini excavators with motor and hoses. Requires 20 l/min flow. Trims hedges and mows grass.