100cm Ditching Bucket for Mini Excavator

A 100 cm ditching bucket is judged first on its geometry and attachment points. Here, the mounting pin spacing is based on a 25 mm pin, intended for a range of compact carriers from 800 kg to 1.8 t. The perforated bottom drains water and fines during work, while a smooth welded cutting edge ensures a clean finish on formation bottoms before backfilling or turfing.

Mounting Compatibility and Operating Characteristics

The 100 cm width suits ditching operations that demand useful volume without unnecessarily loading the stick. The stated weight is 33 kg, to be distributed according to the carrier selected. The bucket mounts on Norteck SX10+, SX16, SX16-pro, or SX17 mini excavators. This pin attachment is also found on Kubota KX36-2, KX36-3, KX41-2, or JCB 801 machines. Before mounting, check the stick pin spacing and pin diameter: it's this dimension that determines compatibility, not just the machine's tonnage.

What This Ditching Bucket Covers

• Perforated bottom to drain water and fine materials during ditching
• Smooth welded cutting edge for finishing trench bottoms and shoulders
• 100 cm useful width for ditches, gutters, and regrading
• 25 mm pin attachment, sold without pins
• Carrier range: mini excavators from 800 kg to 1.8 t

To broaden your options, the 120 cm ditching bucket covers greater widths on the same mounting principle. If you're looking for a tilting tool instead, the Norteck 80 cm tilt ditching bucket adds a degree of freedom to the stick.

The choice between 60, 80, or 100 cm depends mainly on the width of trenches and access points to be redone. On narrow sections or around manholes, the 60 cm ditching bucket fits where a 100 cm one would bottom out. Conversely, this 100 cm model reduces the number of passes on ditches and linear dredging work.